Cangzhou, Hebei, China
Response Time: < 24h
Response Rate: 0%
Model No.: MY-1300/1500/1650 | Place of Origin: China |
Function and characteristics
● Manual feeding can better adapt to warping paper and convenience to feeding, easy put paper in place.
● The paper feeding table can be automatically raised with the paper, easy to operate.
● The size of the grippers can be adjusted up and down with the thickness of the paper and bite paper firmly.
● This machine adopts high strength rigid aluminum alloy gripper row , which is small and stable in its gripper edge, effectively preventing the gripper row from vibrating. Adjustable device is added to the front and rear positioning of the gripper row.
● The main drive adopts pneumatic clutch, frequency modulation motor, smooth and rapid braking.
● Die-cutting steel plate with high hardness and high elasticity of high manganese alloy spring steel material, durable.
Parts Description
01. Feeding part
High quality steel is used to install and fix firmly, and the operation is simple. Can be in normal paper work, code to load the next die-cutting paper, do not cause a waste of time caused by the coding paper link.
The maximum paper feeding size is 1300mm×1010mm /1500mm×1100mm 1650mm×1210mm.
It is equipped with opposite photoelectricity. It can automatically lift and manually adjust the lifting distance. It can also adjust the photoelectric position according to whether the paper is bent or not, so as to ensure that the front edge of the continued paper is flush with the feed baffle.
02. Feeding table
The maximum paper feeding size is 1300mm×1010mm /1500mm×1100mm 1650mm×1210mm.
It is equipped with opposite photoelectricity. It can automatically lift and manually adjust the lifting distance.
It can also adjust the photoelectric position according to whether the paper is bent or not, so as to ensure that the front edge of the continued paper is flush with the feed baffle.
03. Diecutting part and Delivery system
The maximum die-cutting pressure of the main machine is 350N/C㎡.
The main engine is driven by worm wheel and worm, with large torque, stable and reliable transmission, low noise and long service life
The main wall panel is made of high quality ductile iron, and the upper platform and the moving platform are also made of high quality ductile iron, so as to ensure its ability to resist compression, deformation and vibration.
And equipped with a forced lubricating oil pump, the realization of each lubrication point oil quantity. Die - cutting knife version easy installation, extraction freely, short version time.
(the bearings and electrical parts are selected from well-known foreign brands)
Stacker part
Automatic counting, scattered board alarm. Automatic drop of paper receiving, automatic warning and falling of paper receiving full.
According to the size of the product, adjust the left and right and front and back of the paperboard to achieve the paper receiving level.
05. Striping part (optional)
The full waste cleaning template adopts the central positioning system, automatic clamping, quick and convenient to the version; The waste removal frame adopts motor control lifting device; It can automatically remove the three and four sides and the intermediate waste, so as to ensure a clean and efficient production.
The semi-waste cleaning system can be used to clean up the required part of the paperboard to ensure that the waste cleaning is clean and efficient
Electric system
Name |
Picture |
Brand |
Model |
Frequency converter |
Fuji, Japan |
|
|
PLC Control PLC |
Mitsubishi, Japan |
|
|
Contactor |
Fuji, Japan |
|
|
Operation button |
Schneider, France |
|
|
Photoelectric sensor |
Omron, Germany |
|
|
touch screen |
Taiwan Taida |
|
|
Circuit breaker |
LS Korea LS |
D40 D16 D6 |
|
Alarm lamp |
Korea q-light |
|
Other parts
Other parts |
Picture |
Brand/texture of material |
Model |
Toothed chain |
Imported from Germany |
RS2060 |
|
Dentition |
Superhard alloy aluminum |
|
|
Other bearings |
|
NSK Japan NSK |
|
Die cut steel plate |
65 manganese steel Taiwan |
|
|
Intermittent mechanism |
Taiwan |
200° |
|
Feeding and receiving motor |
Taiwan |
750W |
|
Main motor |
Siemens, Germany |
11KW |
|
principal axis |
|
High frequency quenching |
|
Air clutch |
Shanghai Yuyi |
|
|
main bearing |
Sweden |
|
|
Pneumatic valve |
Adek Taiwan |
|
|
Grease pump |
Taiwan |
|
|
Grease pump |
Tianjin |
|
Main parameters
type |
MY-1300 |
MY-1500 |
MY-1650 |
Maximum paper size(mm) |
1300 x 930 |
1500x1100 |
1650x1200 |
/Minimum paper size(mm) |
500 x450 |
550 x500 |
600x550 |
/Maximum die cutting size: |
1280 x910mm |
1480x1080 |
1630x1180 |
Maximum die cutting pressure: |
350T |
350T |
350T |
Processable paper thickness: |
≤8mm
|
≤8mm
|
≤8mm
|
Steel plate thickness: |
7mm |
7mm |
7mm |
top speed: |
5500s/h |
5000s/h |
5000s/h |
Rated power: |
14kw |
15w |
17kw |
Total weight: |
13T |
15T |
18T |
Overall dimensions: |
3700x2300x2300 |
4300x2450x2300 |
5000x2600x2300 |